Agilent Technologies E3631-90002, User Manual, Page: 53 / 166

Chapter 3 Front-Panel Operation
Remote Interface Configuration
52
5 Save the change and turn off the I/O configuration mode.
The RS-232 baud rate and parity selections are stored in
non-volatile
memory, and
does not
change when power has been off or after a remote
interface reset. The power supply displays a message to show that the
change is now in effect. If the baud rate and the parity are not changed,
“NO CHANGE” will be displayed for one second.
N o t e
To cancel the I/O configuration mode without any changes during the
baud rate and parity selection, press the “I/O Config” key until the “NO
CHANGE” message is displayed.
CHANGE SAVED
I/O Config