Agilent Technologies AIC 5000, Installation Manual

Page: 51 / 64

Revision A Installation and Configuration 45
Note
For additional information about the
purpose and options of the
DCOMServerSettings program, please refer
to the data system installation guide.
5. Restart the AIC. After restarting, it should
automatically log directly in to the Windows desktop.
Add One or More Network Printers
In order for the AIC to print analysis reports, it must have one
or more printers configured. For each printer to be
configured, perform the following steps:
1. Select Start > Control Panel > Printers and Faxes .
2. Click on „Add printer‟
3. When the Add Printer Wizard starts, follow the prompts
to install and configure the printer.
If you need a driver disk, insert it in the drive of another
computer of the network, share that drive, and browse to that
share from the AIC.
Note
In order to export Advanced Reports, a
printer must be configured on the AIC
where the export is performed.
Changing the Administrator’s Password
Although not necessary to the operation of the AIC, you may
wish to change the administrator‟s password on the device. To
do so, perform the following steps:
1. Click the Start >Run menu item
2. Type cmd and click Enter .
3. When the command prompt window appears, type:
net user administrator and click Enter
4. At the prompt, enter the new password.