Agilent Technologies Agilent 33500 Series, User Manual

Page: 95 / 278

94
Chapter 3 Features and Functions
Output Configuration
3
• You may protect a device under test (DUT) by specifying upper and
lower voltage limits for the waveform amplitude.
• Front-Panel Operation : To select a function, press . Press
(33521A) or or (33522A) and then set the
Output
softkey to
ON
to output the currently selected waveform. To view the
other waveform choices, press to see the first page of the list,
and then press the
More
softkey to see the rest of the list.
For example, to specify a DC signal from the front panel, press
, then
More
and
DC
. Enter the
Offset
with the knob or
keypad, and if you use the keypad, press
mV
or
V
to finish entering
the value. Then press or or and make sure the
Output
softkey is
ON.
• Remote Interface Operation :
FUNCtion
{SINusoid|SQUare|RAMP|PULSe|NOISe|DC|PRBS|ARB}
You can also use the
APPLy
command to select the function, frequency,
amplitude, and offset with a single command.