Agilent Technologies Agilent 33500 Series, User Manual

Page: 107 / 278

106
Chapter 3 Features and Functions
Output Configuration
3
• Remote Interface Operation :
OUTPut[1|2] {OFF|ON
}
The
APPLy
command overrides the current setting and automatically
enables the channel output connector.
Waveform Polarity
In the normal mode (default), the waveform goes positive during the first
part of the cycle. In the inverted mode, the waveform goes negative
during the first part of the cycle.
• As shown in the examples below, the waveform is inverted relative to
the offset voltage. Any offset voltage present will remain unchanged
when the waveform is inverted.
• When a waveform is inverted, the Sync signal associated with the
waveform is not inverted.
• Front-Panel Operation : Press or or and then press
Polarity
to toggle between the
Normal
and
Inverted
selections.
• Remote Interface Operation :
OUTPut[1|2]:POLarity {NORMal|INVerted
}
No Offset Voltage With Offset Voltage