Agilent Technologies 4395A, Manual Change

Page: 544 / 575

Error Messages in Alphabetical Order
0420 Query UNTERMINA TED
A condition causing an unterminated query error occurred (see IEEE 488.2, 6.3.2.2). F or
example , the analyzer was addressed to talk and an incomplete program message was received
by the controller .
0350 Queue overow
A specic code entered into the queue in lieu of the code that caused the error . This code
indicates that there is no room in the queue and an error occurred but was not recorded.
R
111 RECALL ERROR: INSTR ST A TE PRESET
A serious error , for example corrupted data, is detected on recalling a le , and this forced the
analyzer to be PRESET .
S
110 S A VE ERROR
A serious error , for example physically damaged disk surface , is detected on saving a le .
76 SEGMENT ST ART/STOP O VERLAPPED
Segments are not allowed to be overlapped. Reenter appropriate value for start or stop value
of segments to avoid that segment is not overlapped.
0330 Self-test failed
A self-test failed. Contact your nearest Agilent T echnologies oce or see the Service Manual
for troubleshooting.
0221 Settings conict
A legal program data element was parsed but could not be executed due to the current device
state (see IEEE 488.2, 6.4.5.3 and 11.5.1.1.5).
128 SP AN = 0 ONL Y
The setup must be zero span and spectrum analyzer mode when turning on the RF OUTPUT .
0150 String data error
This error , as well as errors 0151 and 0158, are generated when analyzing the syntax of a
string data element. This particular error message is used if the analyzer cannot detect a more
specic error .
0158 String data not allowed
A string data element was encountered but was not allowed by the analyzer at this point in
parsing.
Messages-12