Agilent Technologies 4395A, Manual Change

Page: 471 / 575

Front P anel K ey Description
4 Cal 5 Continued
NA Cal kit menu
????????????????????????????
CAL KIT:7mm Selects the 7 mm cal kit model.
?????????????
3.5mm Selects the 3.5 mm cal kit model.
?????????????????
N 50 Selects the 50 type-N model.
?????????????????
N 75 Selects the 75 type-N model.
?????????????????????
USER KIT Selects a cal kit model dened or modied by the user . F or information, see \Modifying Calibration
Kits" in Appendix A.
? ????????????????????????????????
SA VE USER KIT Stores the user-modied or user-dened kit into memory , after it has been modied.
??????????????????????????????
MODIFY [7mm] Displays the modify cal kit menu, where a default cal kit can be user-modied.
?
?????????????????????????????????????
DEFINE ST AND ARD Makes the standard number the active function and brings up the dene standard number menus .
The standard number (1 to 8) is an arbitrary reference number used to reference standards when
specifying a class . Each number is similar to a register in that it holds specic information. Each
contains the selected type of device (OPEN, SHORT , or THRU) and the electrical model for that
device .
? ????????????????????????????????????
STD NO .1 [SHORT] !
NA/ZA Standard type menu
Selects standard No .1 as the standard denition. The standard type you selected is shown in the
softkey label enclosed with brackets .
? ???????????????????????????????????
STD NO .2 [OPEN] ! NA/ZA
Standard type menu
Selects standard No .2 as the standard denition. The standard type you selected is shown in the
softkey label enclosed with brackets .
???????????????????????????????????
STD NO .3 [LO AD] ! NA/ZA
Standard type menu
Selects standard No .3 as the standard denition. The standard type you selected is shown in the
softkey label enclosed with brackets .
????????????????????????????????????????????
STD NO .4 [DEL/THRU] !
NA/ZA Standard type menu
Selects standard No .4 as the standard denition. The standard type you selected is shown in the
softkey label enclosed with brackets .
?
??????????????????????????????????
STD NO .5 [LO AD] ! NA/ZA
Standard type menu
Selects standard No .5 as the standard denition. The standard type you selected is shown in the
softkey label enclosed with brackets .
???????????????????????????????????
STD NO .6 [LO AD] ! NA/ZA
Standard type menu
Selects standard No .6 as the standard denition. The standard type you selected is shown in the
softkey label enclosed with brackets .
?????????????????????????????????????
STD NO .7 [SHORT] !
NA/ZA Standard type menu
Selects standard No .7 as the standard denition. The standard type you selected is shown in the
softkey label enclosed with brackets .
? ???????????????????????????????????
STD NO .8 [OPEN] ! NA/ZA
Standard type menu
Selects standard No .8 as the standard denition. The standard type you selected is shown in the
softkey label enclosed with brackets .
? ??????????????????????????????
SPECIFY CLASS Displays softkeys that assign a standard to a standard class . After the standards are modied, use
???????????????????????????????
SPECIFY CLASS to specify that a class consists of specic standards .
??????????????????????????????
SPECIFY : S11A Enters the standard numbers for the rst class required for an S
11
1-port calibration. (F or
predened cal kits , this is OPEN (for the 7 mm) or OPENS (for type-N).)
? ?????????
S11B Enters the standard numbers for the second class required for an S
11
1-port calibration. (F or
predened cal kits , this is SHORT (for the 7 mm) or SHORTS (for the type-N) .)
??????????
S11C Enters the standard numbers for the third class required for an S
11
1-port calibration. (F or
predened kits , this is LO AD .)
??????????????????????????????
SPECIFY : S22A Enters the standard numbers for the rst class required for an S
22
1-port calibration. (F or
predened cal kits , this is OPEN (for the 7 mm) or OPENS (for the type-N).)
??????????
S22B Enters the standard numbers for the second class required for an S
22
1-port calibration. (F or
predened cal kits , this is SHORT (for the 7 mm) or SHORTS (for the type-N).)
?
?????????
S22C Enters the standard numbers for the third class required for an S
22
1-port calibration. (F or
predened kits , this is LO AD .)
????????????
MORE
Softkey Reference B-23