Agilent Technologies 4395A, Manual Change

Page: 223 / 575

T o Save and Recall
6. Press the softkey corresponding to the lename label.
T o Save a Display Image to a TIFF File
1.
Press 4 Save 5
NNNNNNNNNNNNNNNNNNNNNNNNNN
GRAPHICS .
2.
Select where to store the le by pressing either
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
STOR DEV [DISK] (for a built-in disk drive)
or
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
STOR DEV [MEMORY] (for a memory disk).
3.
Enter lename . Then press
NNNNNNNNNNNNNN
DONE .
Note
A display image is saved according to the color setup you have done
on the print setup menu (4 Copy 5
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
PRINT SETUP ). Y ou can choose from
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
PRINT:STANDARD (black and white),
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
PRINT COLOR [FIXED] (color against
white background), and
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
PRINT COLOR [VARIABLE] (color against black
background).
The analyzer saves a TIFF le with an extension, \.TIF " for a DOS format, or a sux, \_T " for
a LIF format.
If there is a le that has the same name you entered on the disk, the error message , \lename
error" will be displayed. T o save the le , use the other lename to save or purge the old le .
T o purge a le , press 4
Save
5
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
FILE UTILITIES
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
PURGE FILE then select the displayed lename
by pressing the associated softkey .
T o Save Measured Data for a Spreadsheet
1. Insert a DOS format disk into the built-in disk drive .
2. Press 4 Save 5
NNNNNNNNNNNNNNNNNNNNNNNNNNNNN
DATA ONLY .
3.
Press
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
SAVE ASCII .
4.
Select the built-in disk drive as the storage device by toggling to
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
STOR DEV [DISK] .
5.
Enter a lename . Then press
NNNNNNNNNNNNNN
DONE .
The analyzer saves an ASCII le with a \.TXT " extension.
The measured data is saved as ASCII text. Each value is separated by a tab . When you
open this le from the spreadsheet software , specify the le format as the \TEXT with T AB
delimiter".
Analyzing the Measurement Results 8-21