Agilent Technologies 4395A, Manual Change

Page: 204 / 575

Interpreting the Trace
Interpreting the Trace
Once you have successfully displayed the correct trace on the screen, you can use the marker
to interpret the trace . The 4395A provides you with powerful search functions that allow you
to search for specic points (like peaks or ripples). This section provides procedures for reading
values using the marker and the marker search functions .
T o read a value using the marker
T o use the sub-markers
T o use the 1marker
T o search for a point that has a target value
T o search for the peak-to-peak of ripples using the statistics function
T o search for a single peak on the trace
T o search for multiple peaks
T o dene the peak for search (to ignore unnecessary peaks)
T o specify the search range
T o Read a V alue Using the Marker
1. Press 4 Ma rk er 5 .
2. Move the marker by performing the following steps:
Turn the rotary knob until the marker moves to the point where you want to read the
measured value .
Enter the target frequency by using numerical keys .
3. Read the marker value displayed on the upper right of the display .
Figure 8-1. Marker Readout
8-2 Analyzing the Measurement Results