Agilent Technologies 4395A, Manual Change

Page: 496 / 575

Front P anel K ey Description
4 Local 5
????????????????????????????????????????????
SYSTEM CONTROLLER Sets the analyzer as the system controller . This mode is used when peripheral devices
are to be used and there is no external controller .
This mode can only be selected manually from the analyzer's front panel and can be
used only if no active system controller is connected to the system through GPIB. If
you try to set system controller mode when another system controller is present, the
message \CA UTION: CAN'T CHANGE - ANOTHER CONTROLLER ON BUS" is displayed.
???????????????????????????????????????????
ADDRESS-ABLE ONL Y Sets the analyzer as addressable only . This mode is used when an external controller
controls peripheral devices or the analyzer . This mode is also used when the external
computer passes control of the bus to the analyzer .
?????????????????????????????????
SET ADDRESSES Displays the following softkeys:
?
??????????????????????????????
ADDRESS:INSTR Sets the GPIB address of the analyzer using the entry controls . There is no physical
address switch to set in the analyzer .
????????????????????????????????????????????
ADDRESS:CONTROLLER Sets the GPIB address the analyzer will use to communicate with the external controller .
? ????????????????
RETURN
4 Preset 5 Presets the instrument state to the preset default value . The preset default values are
listed in Appendix C. 4 Preset 5 has no eect on the following states:
Analyzer Type
Display Allocation
Title
Display A djustment
Color A djustment
Clock Time/Date
Limit Line T able
GPIB A ddress
GPIB Mode (system controller and addressable)
User Cal Kit Denition
4 Cop y 5
B-48 Softkey Reference