Agilent Technologies 4395A, Manual Change

Page: 543 / 575

Error Messages in Alphabetical Order
0108 P arameter not allowed
More parameters were received than expected for the header . F or example , the *SRE command
only accepts one parameter , so receiving *SRE 4,16 is not allowed.
48 PHASE LOCK LOOP UNLOCKED
EXT REF Input of 10 MHz is not proper , or the instrument is needed to adjust or repair .
Check the external reference signal rst. Contact your nearest Agilent T echnologies oce for
adjustment or repair .
193 PO WER ON TEST F AILED
P ower on test failed. Contact your nearest Agilent T echnologies oce .
26 PRINTER: not on, not connected, out of paper
The printer does not respond to control. Check the supply to the printer , online status , sheets ,
and so on.
0284 Program currently running
Certain operations dealing with programs may be illegal while the program is running. F or
example , deleting a running program might not be possible .
0280 Program error
Indicates that a downloaded program-related execution error occurred. This error message
is used when the analyzer cannot detect the more specic errors described for errors 0281
through 0289.
0112 Program mnemonic too long
The header contains more than twelve characters (see IEEE 488.2, 7.6.1.4.1).
0286 Program runtime error
A program runtime error of the HP Instrument B ASIC has occurred. T o get a more specic
error information, use the ERRM$ or ERRN command of the HP Instrument B ASIC.
0285 Program syntax error
Indicates that a syntax error appears in a downloaded program. The syntax used when parsing
the downloaded program is device-specic .
Q
0400 Query errors
This is the generic query error that the analyzer cannot detect more specic errors . This code
indicates only that a query error as dened in IEEE 488.2, 11.5.1.1.7 and 6.3 has occurred.
0410 Query INTERRUPTED
A condition causing an interrupted query error occurred (see IEEE 488.2, 6.3.2.3). F or
example , a query followed by DAB or GET before a response was completely sent.
Messages-11