Agilent Technologies 4395A, Manual Change

Page: 535 / 575

Error Messages in Alphabetical Order
114 CAN'T S A VE GRAPHICS WHEN COPY IN PROGRESS
If you attempt to save graphics when a print is in progress , this error message is displayed.
1 CAN'T SET RB W A UTO IN ZERO SP AN
The RBW A UTO mode cannot be selected in the zero span. The RBW must be specied
manually in the zero span. (spectrum analyzer mode only).
127 CAN'T SET SWEEP TIME A UTO IN ZERO SP AN
The automatic sweep time cannot be in zero span of the spectrum analyzer mode . (The
network analyzer mode allows that the automatic sweep time is turned on.)
0281 Cannot create program
Indicates that an attempt to create a program was unsuccessful. A reason for the failure might
include not enough memory .
0140 Character data error
This error , as well as errors 0141 through 0148, are generated when analyzing the syntax of a
character data element. This particular error message is used if the analyzer cannot detect a
more specic error .
0148 Character data not allowed
A legal character data element was encountered where prohibited by the analyzer .
0144 Character data too long
The character data element contains more than twelve characters (see IEEE 488.2, 7.7.1.4).
0100 Command error
This is a generic syntax error that the analyzer cannot detect more specic errors . This code
indicates only that a command error , as dened in IEEE 488.2, 11.5.1.1.4, has occurred.
0110 Command header error
An error was detected in the header . This error message is used when the analyzer cannot
detect the more specic errors described for errors 0111 through 0119.
75 COMMAND IGNORED - SEGMENT NOT DONE YET
The GPIB command the analyzer received is ignored, because the segment is editing (GPIB
only). Send LIMSDON (limit segment done) or SDON (segment done) to terminate editing
segment. (See Programming Manual.)
269 COMPENS A TION ABORTED
Compensation data acquisition process is aborted.
267 COMPENST A TION REQUIRED
Compensation is required. P erform compansation to obtain compensation data.
Messages-3