Agilent Technologies 4395A, Manual Change

Page: 150 / 575

Selecting an appropriate connection of DUT
F or Spectrum Measurement
Connections of DUT in the spectrum measurement varies depending upon how the
measurement signal can be obtained as described in this section.
Connecting DUT When Directly Measuring the Signal
When you measure a signal which is directly supplied from the DUT to 4395A , connect the
DUT as shown in Figure 5-7 .
Figure 5-7. Connecting DUT When Directly Measuring the Signal
Connecting DUT When Measuring the Signal in a Circuit
Use the active probe to capture the measurement signal which is in a circuit as shown in
Figure 5-8.
5-6 Preparations for Measurements