manualshive.com logo in svg

Agilent Technologies 34970A, User Manual, Page: 191 / 356

Share
Download
Agilent Technologies 34970A User Manual Download Page 191

191

Chapter 4  Features and Functions

Remote Interface Configuration - 34972A

4

Setting the Default Gateway

You can set the default gateway for your LAN connection. Contact your 
network administrator to determine whether subnetting is being used 
and for the correct address. If DHCP is enabled, DHCP will auto-assign 
the gateway. This auto-assigned gateway takes precedence over the 
static gateway assigned with this menu option. You must disable DHCP 
in order to set this on the front panel.

•

Front-Panel Operation

: 

DEF GATEWAY

Setting the DNS Server

You can set the address of the DNS server for your LAN 
connection.Contact your network administrator to determine whether 
DNS is being used and for the correct address. If DHCP is available and 
enabled, DHCP will auto-assign the DNS address. This auto-assigned 
DNS address takes precedence over the static DNS address assigned 
with this menu option. You must disable DHCP in order to set this on the 
front panel.

•

Front-Panel Operation

: 

DNS SERVER

Viewing the MAC Address

You can view the MAC address of your 34972A. This address is of the 
form ##:##:##:##:##:##, where each # is a hexadecimal digit (0-9 or A-F). 
The LAN relies on every device attached to the network having a unique 
MAC address. The MAC address for each instrument is set at the factory 
and cannot be changed.

•

Front-Panel Operation

: 

MAC ADDRESS

34970A Refresh UG.book  Page 191  Wednesday, February 17, 2010  12:34 PM

Summary of Contents for 34970A





































































































































































































































































































































































Reviews:

No comments