manualshive.com logo in svg

Agilent Technologies 34970A, User Manual, Page: 110 / 356

Share
Download
Agilent Technologies 34970A User Manual Download Page 110

110

 

Chapter 4  Features and Functions

Scanning

•

Remote Interface Operation

: The following command retrieves stored 

readings from memory (the readings are not erased).

 FETCH? 

Use the following commands to query the statistics on the readings 
stored in memory for a specific channel. These commands do not 
remove the data from memory.

CALC:AVER:MIN? (@305)

Minimum reading on channel

CALC:AVER:MIN:TIME? (@305)

Time minimum was logged

CALC:AVER:MAX? (@305)

Maximum reading on channel

CALC:AVER:MAX:TIME? (@305)

Time maximum was logged

CALC:AVER:AVER? (@305)

Average of all readings on channel

CALC:AVER:COUNT? (@305)

Number of readings taken on channel

CALC:AVER:PTPEAK? (@305)

Peak-to-peak (maximum-minimum)

The following command retrieves the last reading taken on channel 
301 during a scan.

DATA:LAST? (@301) 

The following command clears the contents of statistics memory for 
the selected channel.

CALC:AVER:CLEAR (@305) 

Use the following command to determine the total number of 
readings stored in memory (all channels) from the most recent scan.

DATA:POINTS? 

The following command reads and clears the specified number of 
readings from memory. This allows you to continue a scan without 
losing data stored in memory (if memory becomes full, new readings 
will overwrite the first readings stored). The specified number of 
readings are cleared from memory, starting with the oldest reading.

DATA:REMOVE? 12

34970A Refresh UG.book  Page 110  Wednesday, February 17, 2010  12:34 PM

Summary of Contents for 34970A





































































































































































































































































































































































Reviews:

No comments