manualshive.com logo in svg

Agilent Technologies 34970A, User Manual, Page: 177 / 356

Share
Download
Agilent Technologies 34970A User Manual Download Page 177

177

Chapter 4  Features and Functions

Mass Memory (USB) Subsystem - 34972A

4

SCPI Commands

This section concentrates on the features available from the front panel; 
you can also control the mass memory subsystem with the following 
SCPI commands:

•

MMEMory:FORMat:READing:CSEParator <

column_separator

>

•

MMEMory:FORMat:READing:CSEParator?

•

MMEMory:FORMat:READing:RLIMit <

row_limit

>

•

MMEMory:FORMat:READing:RLIMit?

•

MMEMory:LOG[:ENABle] <

state

>

•

MMEMory:LOG[:ENABle]?

•

MMEMory:EXPort?

•

MMEMory:IMPort:CONFiguration? "<

configuration_file

>"

•

MMEMory:IMPort:CATalog?

For more information on the SCPI commands available to program the 
instrument over the remote interface, see the MMEMory commands in 
the 

Agilent 34970A/34972A Programmer’s Reference Help

.

Folder and File Structure

Folder Description  

Each saved scan will be stored in a top-level folder named: 

/34972A/data/[instrument_SN]/[yyyymmdd_hhmmssmmm]

The square brackets ( [ ] ) are not actually part of the directory name, 
and the yyyymmdd_hhmmssmmm is a timestamp indicating the 
approximate start of the scan. The format is year (yyyy), month (mm), 
day (dd), underscore (_), hours (hh), minutes (mm), seconds (ss), and 
milliseconds (mmm).

34970A Refresh UG.book  Page 177  Wednesday, February 17, 2010  12:34 PM

Summary of Contents for 34970A





































































































































































































































































































































































Reviews:

No comments