72
12. Determine which side of fuse you will mount the
fuel filler dot. Mark the wing leading edge loca-
tion to prevent interference with the wing when
installing the filler dot.
14. Mark the location of the fuel filler dot.
Note
: The higher you mount the fuel fill dot the
less fuel will siphon out when fueling.
13. Gather the fuel filler dot and drill bits as shown
below.
Note:
We recommend you start with a smaller size
drill bit then increase the bit size to the
correct size to fit your filler dot. This will
help prevent the fuse side from splitting
or
cracking.
11. Route the line to the engine carburetor out of the
bottom of the engine box. Use rubber grommet
where the fuel line goes through the plywood to
prevent fuel line chafing. Secure all fuel lines
with nylon sip ties.
Note:
It is recommended you always use a fuel
filter in the carburetor line.
