48
7. Mark and use a 1/16” drill bit for the servo
mounting screws.
8. Mount the throttle servo using servo mounting
screws.
Note:
Place a drop of CA glue on the throttle
servo mounting screws from inside the
engine box to prevent loosening from engine
vibration.
9. Thread a 4-40 ball link half way onto the
threaded coupler as shown.
10. With the servo arm centered and the throttle arm
of the carburetor at half throttle, measure and
mark the end of the throttle pushrod wire that
will be inserted into the threaded coupler as
shown.
