83
16. Finished cowl installation shown below
17. Secure front section of cowl using
(2) T2.6x10mm flat head screws.
Cowl Installation with Greves Pipes
1. If using Greves pipes use the same cowl mount-
ing steps as for standard mufflers. No other steps
or required for mounting of the cowl. All hot air
exit holes have been pre cut from the factory.
Cowl Installation with Canisters
1. If using canister mufflers use the same cowl
mounting steps as for standard mufflers. No
other steps or required for mounting of the cowl.
All hot air exit holes have been pre cut from the
factory.
Always check the operating temperature of your
engine to prevent any damage from occurring.
Aeroworks is not responsible for damages incurred
from improper engine cooling.
Always check the operating temperature of your
engine to prevent any damage from occurring.
Aeroworks is not responsible for damages incurred
from improper engine cooling.
