44
Engine Installation
1. The 150cc Yak 54 will accept a wide range of
engine types. Illustrations for a DA-150
installation are provided below. Gather the en-
gine, mounting hardware and
supplied
DA 150
hardwood mounting spacer block.
Note:
Engine mounting hardware is
Not Supplied
ENGINE INSTALLATION
2. 6mm Machined Aluminum spacers are included
to set the proper stand off distance for your en-
gine if the DA 150 is not your engine of choice.
3. Locate the laser cut engine mounting template
for the DA-150.
Note:
If other engines are used the templates may
be modified to fit you engine selection. Center
your engine over the laser marked thrust lines
on the template. Mark and drill the engine
mounting hole locations for your engine.
Follow the next steps for mounting your
engine
4. Remove mounting screws from the engine box
hatch cover.
