2
TABLE OF CONTENTS
Page
Aeroworks Contact Information …………………………………………………………………………. 3
Introduction / Warranty…………………………………………………………………………. ………. 4
Kit Contents………………………………………………………………………………………………… 5
Items Needed To Complete ……………………………………………………………………………….. 8
Tightening and Re-shrinking The Covering ……………………………………………………………… 9
Checking Seams and Color Overlaps for Good Seal / Sealing Hinge Gaps ………..………………….. 10
Wing Assembly………………………………………………………………….…………………………. 11
Stab and Elevator Assembly………………………………………………………………………………. 19
Rudder and Rudder Servos Installation ………………………………………………………. ……….. 25
Tail Wheel Installation ………………………………………………………………………….. ………. 37
Main Landing Gear and Wheel Pant Installation …………………………………………….. ……….. 40
Engine Installation ……………..…………………………………………………………………………. 44
Throttle and Choke Servo Installation …………………………………………………………………… 46
Standard Muffler Installation ……………………………………………………………………………. 51
Greves Pipe Installation …………………………………………………………………………. ………. 51
Canister Muffler Installation ……………………………………………………………………. ………. 58
Ignition Module Installation ……………………………………………………………………. ………. 64
Fuel Tank Assembly and Installation ………………………………………………………….. ………. 67
Radio Installation …………………………………………………………………………………………. 74
Cowl Preparation and Installation for Standard Mufflers …………………………………………….. 79
Cowl Installation for Canister and Greves Pipe Installation …………………………………………. . 83
Manual Choke Installation ……………………………………………………………………... ………. 84
Preflight Preparation …………………………………………………………………………….. …….. .. 85
Decal installation ………………………………………………………………………………………… 88
Center of Gravity / Control Throws ……………………………………………………………. ……… 92
Preflight Check List ……………………………………………………………………………………… 96
