28
6. Gather the rudder servos (min 180 in./oz.)
3” to 3 1/2” Double out put servo arms and a
11” Y harness as shown below.
Note:
If using higher Torque (
min 300 in./oz
.)
Digital, Metal Geared servo, only two servos
are required. This is the installation we will
use. If three servos are used, installation
process will be similar.
7. Remove wood screws from the fuselage remov-
able radio floor.
8. Remove radio floor from fuselage.
9. Attach the Y harness to aft rudder servo lead
and secure with safety wire, string, tape, or other
method. Ensure the connectors will not come
apart from vibration or light tension.
