49
11. Cut the throttle pushrod to the proper length.
12. Gather the soldering tools as shown below.
Note:
For best results we recommend a high
quality Silver Solder like “Sta-Brite” silver
solder.
13. Solder the threaded coupler to the throttle
pushrod wire.
Note:
Lightly sand end of rod for best bond.
14. Attach the throttle pushrod with the 4/40 ball
links and secure. Power up the receiver and
throttle servo and adjust pushrod for proper op-
eration. Ensure the servo or rod does not bind or
jam at closed or full open positions.
