13
9.
Plug the male ends of the 24” and 36” exten-
sion into the female ends of one Y harness.
Next plug the male end of this Y harness into
the female end of the other Y harness.
10.
Secure all Y harness connections with safety
wire, string, tape, or other method. Ensure the
connectors will not come apart from vibration
or light tension. Secure excess wire from Y
harness and extensions inside the wing root rib
using tape or Velcro as desired.
11.
Install all three servos in servo wells with the
output shaft toward the leading edge of the
wing. Use a 1/16 bit to drill servo mounting
holes.
12.
Install servo with servo mounting screws.
