MRK-D-0048 V4
Aeroqual Dust Sentry / AQS User Guide
Page | 25
4.3 Communication settings
Figure 4-9 The different connection types require different settings in the Configure Instrument app
a)
The Ethernet mode is set to Auto (DHCP client). In this configuration the MOXA modem can be
used. The MOXA modem will assign IP address
192.168.127.10
to the ePC. The WIFI mode is
set to Access Point so a direct connection to the EPC can be made over local WIFI.
b)
The Ethernet mode is set to Auto (DHCP client). In this example the ePC has been plugged in an
office router using an Ethernet cable. The router has assigned IP address
192.168.85.177
to the
ePC.
The WIFI mode is set to Access Point so a direct connection to the ePC can be made over local
WIFI, the Ethernet mode is set to Auto (DHCP client). In this configuration the MOXA modem can
be used. The MOXA modem will assign IP address
192.168.127.10
to the ePC.
c)
The WIFI mode is set to Client and is connected to the office WIFI network. The ePC has been
given a WIFI IP address
192.168.0.158
by the router This IP address can be entered directly in
the browser to connect to the monitors.
d)
The Ethernet mode is set to Direct (DHCP Server). In this configuration a laptop can be directly
connected to the ePC using an Ethernet cable. Enter
10.10.0.1
to connect directly to the monitors.
NOTE: Should you need to reset the communication settings, see the following section, Section 4.4.