![background image](http://html.mh-extra.com/html/aeroqual/aqs-1/aqs-1_user-manual_2862866024.webp)
MRK-D-0048 V4
Aeroqual Dust Sentry / AQS User Guide
Page | 24
Figure 4-7 Column three in the Configure Instrument app control the communication and connection
settings
Ethernet connection
The ePC has a separate wired Ethernet connection, this can used in a number of ways:
To directly connect to a PC
To connect to a wired LAN via a router
To connect to an IP modem to provide cellular communication.
The WIFI connection and Ethernet connection are independent from each other, both can be used at
the same time. The recommended configuration for connection is to set the WIFI mode to Access
Point and the wired Ethernet to Client mode to use with the MOXA modem.
To use an ethernet cable, ensure the blue Ethernet cable from the ePC is plugged in to the Ethernet
plug in the bottom of the instrument, as shown in
Ethernet mode is set to DCHP (server) in this
method.
Figure 4-8 To establish a direct connection, a laptop must be connected to the ePC using an Ethernet
cable