MRK-D-0048 V4
Aeroqual Dust Sentry / AQS User Guide
Page | 20
4 Connectivity
The monitors use an industrial embedded PC (ePC) for data logging and monitor control. A cellular
modem can be fitted underneath the ePC to facilitate remote connection and support from Aeroqual
technical support.
– see section 4.2.2 Connecting using a cellular modem.
There are two ways to connect to your monitors:
Aeroqual Connect
(via Direct WIFI / LAN)
for initial set up and when access to the internet
is limited;
Aeroqual Cloud (via Network WIFI / Modem)
for remote access, visibility of all your
monitors, and remote technical support from Aeroqual Care.
Aeroqual highly recommends every monitor is connected to Aeroqual Cloud for the best user
experience, additional data features, and Aeroqual Care.
Engineers who need to perform service or data analysts who need to view or download data can do
so using a web browser on their PC, tablet or smart phone. There is no software to download and
install.
Data Security
The data belongs to you. We look after it in the same way that a bank looks after your money. Who
you let access your data is entirely up to you
– our job is to carry out your instructions.
If you do choose to store data with us, then here are some of the security assurances we provide:
We use only ISO 27001 approved data centres
Infrastructure is monitored and protected 24/7
Data is accessed via a secure website with 256-bit SSL encryption
User defined passwords
4.1 Aeroqual Connect (via Direct WIFI / LAN)
Aeroqual Connect contains all of the tools necessary to view and download the data and maintain and
calibrate a single monitor.
No internet connection is required for Aeroqual Connect. Aeroqual Connect is always running on the
monitor and can be accessed via WIFI through an internet browser on any device, there is no
software to install.
Figure 4-1 Aeroqual Connect Home page
Connect to Aeroqual Connect via Direct WIFI
A few minutes after powering on, you should see a new WIFI
network in your device’s list of WIFI
networks. The WIFI name (SSID) will match your serial number, connect to this network using the
password below.
WIFI SSID:
DS DDMMYYYY-XXX
or
AQS1 DDMMYYYY-XXX
Password:
Aeroqual