![background image](http://html.mh-extra.com/html/aeroqual/aqs-1/aqs-1_user-manual_2862866022.webp)
MRK-D-0048 V4
Aeroqual Dust Sentry / AQS User Guide
Page | 22
Figure 4-3 Generate advanced graphical presentations such as wind roses and pollution roses.
Figure 4-4 Select multiple monitors by region, and plot data from multiple different monitors on the same
graph.
Figure 4-5 Receive SMS text alerts directly to your smart phone or by email.
Connecting over a local area network (LAN)
The monitors can be added to a LAN, in two ways:
The WIFI function of the monitor is used to connect to a WIFI network that is connected to the
internet.
An Ethernet cable is used to connect the monitor to router that is connected to a LAN.
When this happens the monitor will automatically be assigned an IP address by the LAN router.
You must find out what this IP address is so you can connect to the monitor and access the monitor
software. The WIFI or wired LAN IP address will likely be in the format: 192.168.XXX.XXX
Figure 4-7 shows the Connect software with an assigned IP address in the address bar in the
browser.