manualshive.com logo in svg

Aerohive access point, Deployment Manual

Experience seamless and high-performing wireless connectivity with the Aerohive access point. To ensure effortless setup and configuration, make sure to download the free Deployment Manual from our website. This comprehensive manual provides detailed instructions on maximizing your network's potential and can be easily accessed at manualshive.com.

Share
Download
background image

Chapter 7 The HiveManager Platform

94

Aerohive

D

EVICE

, P

OWER

, 

AND

 E

NVIRONMENTAL

 S

PECIFICATIONS

Understanding the range of specifications for the HiveManager is necessary for optimal deployment and operation of 
the device. The following specifications describe the physical features and hardware components, the electrical 
requirements for the power supply and cord, and the temperature and humidity ranges in which the device can 
operate.

Device Specifications

•

Form factor: 1U rack-mountable device

•

Chassis dimensions: 16 13/16" W x 1 3/4" H x 15 13/16" D (42.7 cm W x 4.4 cm H x 40.2 cm D)

•

Weight: 13.75 lb. (6.24 kg)

•

Serial port: male DB-9 RS-232 port (bits per second:9600, data bits: 8, parity: none, stop bits: 1, flow control: 
none)

•

USB port: standard Type A USB 2.0 port

•

Ethernet ports: MGT and LAN — autosensing 10/100/1000Base-T Mbps

Power Specifications

•

ATX (Advanced Technology Extended) autoswitching power supply with PFC (power factor corrector):
•

Input: 100 – 240 VAC

•

Output: 250 watts

•

Power supply cord: Standard three conductor SVT 18AWG cord with an NEMA5-15P three-prong male plug and 
three-pin socket

Environmental Specifications

•

Operating temperature: 32 to 140 degrees F (0 to 60 degrees C)

•

Storage temperature: -4 to 176 degrees F (-20 to 80 degrees C)

•

Relative Humidity: 10% – 90% (noncondensing)

Summary of Contents for access point






























































































































































































































Reviews:

No comments

Related manuals for access point

3Com AirConnect 9550 Quick Start Manual preview
AirConnect 9550
Brand: 3Com Pages: 68
Hama 00062764 V2 Operating Instructions Manual preview
00062764 V2
Brand: Hama Pages: 67
FMN alpha EDGE HS Instructions For Use Manual preview
alpha EDGE HS
Brand: FMN Pages: 28
M-Life ML0674B Owner'S Manual preview
ML0674B
Brand: M-Life Pages: 32
One Touch Y280 User Manual preview
Y280
Brand: One Touch Pages: 12
Z-Com XV-5850 User Manual preview
XV-5850
Brand: Z-Com Pages: 18
Cranberry Red CN-AP-2040 Quick Installation Manual preview
Red CN-AP-2040
Brand: Cranberry Pages: 2
Linksys WM54G User Manual preview
WM54G
Brand: Linksys Pages: 25
Linksys WAP2000 User Manual preview
WAP2000
Brand: Linksys Pages: 40
Linksys MAX-STREAM EA9350 User Manual preview
MAX-STREAM EA9350
Brand: Linksys Pages: 45
Caimore CM520-8AE User Manual preview
CM520-8AE
Brand: Caimore Pages: 83
Cisco AT&T U-VERSE VEN401 User Manual preview
AT&T U-VERSE VEN401
Brand: Cisco Pages: 52
Cisco Aironet 2600 Series Getting Started Manual preview
Aironet 2600 Series
Brand: Cisco Pages: 38
Cisco C9117AXI-ME-x Getting Started Manual preview
C9117AXI-ME-x
Brand: Cisco Pages: 36
Cisco Aironet 1850 Series Deployment Manual preview
Aironet 1850 Series
Brand: Cisco Pages: 67
Cisco Aironet 3600 Series Getting Started Manual preview
Aironet 3600 Series
Brand: Cisco Pages: 40
Cisco DigiStar E320.1 User Manual preview
DigiStar E320.1
Brand: Cisco Pages: 18
Cisco Aironet 700W Series Getting Started Manual preview
Aironet 700W Series
Brand: Cisco Pages: 31

Brands by name

Popular brands

Load more brands