Aerohive access point Deployment Manual Download Page 98 | Manualshive

Page: 98 / 221

background image

Deployment Guide

97

P

RODUCT

O

VERVIEW

Console Port

A male DB-9 serial port to which you can make a console connection using
an RS-232 (or "null modem") cable. The pin assignments are the same as
those on the HiveManager and on the HiveAP (see

"Ethernet and Console

Ports" on page 30

).

The management station from which you make a serial connection to the
HiveManager must have a VT100 emulation program, such as Tera Term
Pro

©

(a free terminal emulator) or Hilgraeve Hyperterminal

®

(provided

with Windows

®

operating systems). The following are the serial

connection settings: bits per second: 9600, data bits: 8, parity: none,
stop bits: 1, flow control: none. The default login name is admin and the
password is aerohive. After making a connection, you can access the
Linux operating system.

MGT and LAN Ethernet Ports

The MGT and LAN Ethernet ports are compatible with 10/100/1000-Mbps
connections, automatically negotiate half- and full-duplex mode with the
connecting devices, and support RJ-45 connectors. They are autosensing
and automatically adjust to straight-through and cross-over Ethernet
cables. The two ports allow you to separate traffic between the
HiveManager and its administrators from traffic between the
HiveManager and the HiveAPs it manages. The wiring terminates the
same way as that on the standard capacity HiveManager (see

"Ethernet

and Console Ports" on page 91

).

Reset Button

The reset button allows you to reboot the High Capacity HiveManager.
Insert a paper clip, or something similar, into the hole and press the reset
button between 1 and 5 seconds. After releasing the button, the Power
LED goes dark, and then glows steady amber while the software loads and
the system performs a self-test. After the software finishes loading, the
Power LED glows steady green

Power LED

The power LED conveys the operational states for the system power:
dark = no power; steady green = powered on.

On/Off Switch

The on and off switch controls the power to the HiveManager.

Serial Number Label

The serial number label contains the serial number for the device.

System Fans

The three system fans maintain an optimum operating temperature. Be
sure that air flow through the system fan vents is not obstructed.

Dual AC Power Supplies

There are two power supplies. Each three-prong AC power inlet is a C14
chassis plug through which you can connect the HiveManager to a 100 –
240-volt AC power source using the 10-amp/125-volt IEC power cords that
ship with the product. By cabling each power supply to a different
source, they provide redundancy in the event of a single power failure.
Each power supply has a fan that maintains its temperature. It is
important that nothing obstructs the air flow to these fans so that the
power supplies do not overheat.

Component

Description

«
...
96
97
98
99
100
...
»

Summary of Contents for access point






























































































































































































































Reviews:

No comments

Related manuals for access point

DIR-130 - Broadband VPN Router

Brand: D-Link Pages: 13

Powerline MD 90222

Brand: Medion Pages: 124

Brand: EnGenius Pages: 2

Brand: Ebyte Pages: 16

PTP 550E Series

Brand: Cambium Networks Pages: 250

Brand: Loopcomm Pages: 91

Brand: Arista Pages: 6

Brand: Technicolor Pages: 61

Brand: Speco Pages: 4

Brand: HPE Pages: 4

Brand: HPE Pages: 4

Brand: CNET Pages: 1

Brand: AirMobi Pages: 12

Brand: AirMobi Pages: 61

Brand: Sierra Wireless Pages: 62

AirPrime AR7558

Brand: Sierra Wireless Pages: 60

Brand: Sierra Wireless Pages: 69

Brand: Laird Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands