Advantech EKI-9228G-8CMI, User Manual

Page: 80 / 324

EKI-9228G Series User Manual 62
Trap Receiver v3
Use the SNMP v3 Trap Receivers page to configure settings for each SNMPv3 man-
agement host that will receive notifications about traps generated by the device. The
SNMP management host is also known as the SNMP trap receiver.
To access this page, click System > Advanced Configuration > SNMP > Trap
Receiver v3.
Figure 4.53 System > Advanced Configuration > SNMP > Trap Receiver v3
The following table describes the items in the previous figure.
Filter The name of the filter for the SNMP management host. The filter is
configured by using the CLI and defines which MIB objects to include
or exclude from the view. This field is optional.
UDP Port The UDP port on the SNMP management host that will receive the
SNMP notifications. If no value is specified when configuring a
receiver, the default UDP port value is used.
Submit Click Submit to save the values.
Cancel Click Cancel to close the window.
Item Description
Host IP Address The IP address of the SNMP management host that will receive traps
generated by the device.
User Name The name of the SNMP user that is authorized to receive the SNMP
notification.
Notify Type The type of SNMP notification to send the SNMP management host:

Trap: An SNMP message that notifies the host when a certain
event has occurred on the device. The message is not acknowl-
edged by the SNMP management host.

Inform: An SNMP message that notifies the host when a certain
event has occurred on the device. The message is acknowl-
edged by the SNMP management host.
Security Level The security level associated with the SNMP user, which is one of the
following:

No Auth No Priv: No authentication and no data encryption (no
security).

Auth No Priv: Authentication, but no data encryption. With this
security level, users send SNMP messages that use an MD5
key/password for authentication, but not a DES key/password
for encryption.

Auth Priv: Authentication and data encryption. With this security
level, users send an MD5 key/password for authentication and a
DES key/password for encryption.
Timeout Value The number of seconds to wait for an acknowledgment from the
SNMP receiver before resending an inform message.
Retries The number of times to resend an inform message that is not
acknowledged by the SNMP receiver.
Filter The name of the filter for the SNMP management host. The filter is
configured by using the CLI and defines which MIB objects to include
or exclude from the view. This field is optional.
Item Description