Advantech EKI-9228G-8CMI, User Manual

Page: 315 / 324

297 EKI-9228G Series User Manual
Click QoS > Diffserv > Policy Summary > Add.
Figure 4.323 QoS > Diffserv > Policy Summary > Add
The following table describes the items in the previous figure.
4.7.3.5 Policy Configuration
Use the Diffserv Policy Configuration page to add or remove a DiffServ policy-class
association and to configure the policy attributes. The policy attributes identify the
action or actions taken when a packet matches a class rule.
To access this page, click QoS > Diffserv > Policy Configuration.
Figure 4.324 QoS > Diffserv > Policy Configuration
The following table describes the items in the previous figure.
Item Description
Policy Enter the name of the policy.
Type The traffic flow direction to which the policy is applied:

In: The policy is specific to inbound traffic.

Out: The policy is specific to outbound traffic.
Submit Click Submit to save the values.
Cancel Click Cancel to close the window.
Item Description
Policy The name of the policy. To add a class to the policy, remove a class
from the policy, or configure the policy attributes, you must first select
its name from the menu.
Type The traffic flow direction to which the policy is applied.
Class The DiffServ class or classes associated with the policy. The policy is
applied to a packet when a class match within that policy-class is
found.
Policy Attribute
Details The policy attribute types and their associated values that are config-
ured for the policy.
Refresh Click Refresh to update the screen.
Add Class Click Add Class to add a class to the policy.
Add Attribute Click Add Attribute to add attributes to a policy or to change the policy
attributes.
Remove Last Class Click Remove Last Class to remove the most recently associated
class from the selected policy.