Advantech EKI-9228G-8CMI, User Manual

Page: 252 / 324

EKI-9228G Series User Manual 234
To add a new protocol based VLAN:
Click Switching > Protocol Based VLAN > Status > Add.
Figure 4.262 Switching > Protocol Based VLAN > Status > Add
VLAN The VLAN ID associated with the PBVLAN. VLAN tagging for the PBV-
LAN works as follows:

If the frame received over a port is tagged, normal processing
takes place.

If the frame received over a port is untagged, the frame type is
matched according to the protocol(s) assigned to the group on
that port.
–
If a match is found, the frame is assigned the VLAN ID speci-
fied for the group.
–
If a match is not found, the frame is assigned the port VID
(PVID) as its VLAN ID.
Protocol The protocol or protocols to use as the match criteria for an Ethernet
frame. The protocol is included in the two-byte EtherType field of the
frame. When adding a PBVLAN, you can specify the EtherType hex
value or (for IP, ARP, and IPX) the protocol keyword.
Interface The interfaces that are members of the PBVLAN group. An interface
can be a member of multiple groups as long as the same protocol is
not specified in more than one group that includes the interface. When
adding a PBVLAN group, use the Available Interfaces and Group Inter-
faces fields to configure the interfaces that are members of the PBV-
LAN group. To move an interface between the Available Interfaces and
Group Interfaces fields, click the interface (or CTRL + click to select
multiple interfaces), and then click the appropriate arrow to move the
selected interfaces to the desired field.
Refresh Click Refresh to update the screen.
Add Click Add to add a new protocol based VLAN.
Remove Click Remove to remove the selected entries.
Item Description