Advantech EKI-9228G-8CMI, User Manual

Page: 249 / 324

231 EKI-9228G Series User Manual
To access this page, click Switching > VLAN > RSPAN.
Figure 4.256 Switching > VLAN > Status
The following table describes the items in the previous figure.
4.4.21 IP Subnet Based VLAN
4.4.21.1 Status
Use the IP Subnet Based VLAN Status page to add, edit, and remove IP subnet-
based VLANs. IP subnet-based VLANs allow incoming untagged packets to be
assigned to a VLAN based on the source IP address of the packet. All hosts in the
same subnet are members of the same VLAN.
To access this page, click Switching > IP Subnet Based VLAN > Status.
Figure 4.257 Switching > IP Subnet Based VLAN > Status
The following table describes the items in the previous figure.
To add a new IP subnet-based VLAN:
Item Description
RSPAN VLAN Click the drop-down menu to select the VLAN to use as the RSAN
VLAN.
Submit Click Submit to save the values and update the screen.
Refresh Click Refresh to update the screen.
Cancel Click Cancel to restore default value.
Item Description
IP Address The network address for the IP subnet. All incoming untagged packets
that have a source IP address within the defined subnetwork are
placed in the same VLAN.
Subnet Mask The subnet mask that defines the network portion of the IP address.
VLAN ID The VLAN ID of the IP subnet-based VLAN. If the source IP address of
untagged traffic received on any port or LAG is within the associated IP
subnet, the traffic is tagged with this VLAN ID.
Refresh Click Refresh to update the screen.
Add Click Add to add a new IP subnet-based VLAN.
Edit Click Edit to edit the selected entries.
Remove Click Remove to remove the selected entries.