Advantech EKI-9228G-8CMI, User Manual

Page: 257 / 324

239 EKI-9228G Series User Manual
The following table describes the items in the previous figure.
Item Description
Interface The interface associated with the rest of the data in the row. When
editing interface settings, this field identifies the interface being config-
ured.
Mode The private VLAN mode of the interface, which is one of the following:

General: The interface is in general mode and is not a member of
a private VLAN.

Access: Access mode is suitable for ports connected to end sta-
tions or end users. Access ports participate only in one VLAN.
They accept both tagged and untagged packets, but always
transmit untagged packets.

Trunk: Trunk mode is intended for ports that are connected to
other switches. Trunk ports can participate in multiple VLANs and
accept both tagged and untagged packets.

General: General mode enables a custom configuration of a port.
The user configures the General port VLAN attributes such as
membership, PVID, tagging, ingress filter, etc., using the settings
on the Port Configuration page. By default, all ports are initially
configured in General mode.

Promiscuous: The interface belongs to a primary VLAN and can
communicate with all interfaces in the private VLAN, including
other promiscuous ports, community ports, and isolated ports.

Host: The interface belongs to a secondary VLAN and, depend-
ing upon the type of secondary VLAN, can either communicate
with other ports in the same community (if the secondary VLAN is
a community VLAN) and with the promiscuous ports or is able to
communicate only with the promiscuous ports (if the secondary
VLAN is an isolated VLAN).
Host Primary VLAN The primary private VLAN the port is a member of when it is configured
to operate in Host mode.
Host Secondary
VLAN The secondary private VLAN the port is a member of when it is config-
ured to operate in Host mode. The secondary private VLAN is either an
isolated or community VLAN.
Promiscuous Pri-
mary VLAN The primary private VLAN in which the port is a member when it is con-
figured to operate in Promiscuous mode.
Promiscuous Sec-
ondary VLAN The secondary private VLAN the port is a member of when it is config-
ured to operate in Promiscuous mode. The secondary private VLAN is
either an isolated or community VLAN.
Operational Private
VLAN The primary and secondary operational private VLANs for the inter-
face. The VLANs that are operational depend on the configured mode
for the interface and the private VLAN type.
Refresh Click Refresh to update the screen.
Edit Click Edit to edit the selected entries.
Remove Host Asso-
ciation Click Remove Host Association to remove the association between
an interface and the primary/secondary private VLANs that the inter-
face belongs to when it operates in host mode.
Remove Promiscu-
ous Association Click Remove Promiscuous Association to remove the association
between an interface and the primary/secondary private VLANs that
the interface belongs to when it operates in promiscuous mode.