Advantech EKI-9228G-8CMI, User Manual

Page: 126 / 324

EKI-9228G Series User Manual 108
4.3.8.4 CLI Banner
Use the CLI Banner Configuration page to configure a message that appears before
the user prompt as a Pre- login banner. The message configured shows up on Telnet,
SSH and Console connections.
To access this page, click System > Management Access > CLI Banner.
Figure 4.109 System > Management Access > CLI Banner
The following table describes the items in the previous figure.
4.3.8.5 HTTP
Use the HTTP Configuration page to configure the HTTP server settings on the sys-
tem.
To access this page, click System > Management Access > HTTP.
Figure 4.110 System > Management Access > HTTP
The following table describes the items in the previous figure.
Item Description
CLI Banner Message Text area for creating, viewing, or updating the CLI banner message.
To create the CLI banner message, type the desired message in the
text area. If you reach the end of the line, the text wraps to the next
line. The line might not wrap at the same location in the CLI. To create
a line break (carriage return) in the message, press the Enter key on
the keyboard. The line break in the text area will be at the same loca-
tion in the banner message when viewed through the CLI.
Submit Click Submit to save the values and update the screen.
Refresh Click Refresh to update the screen.
Clear Click Clear to clear the CLI banner message from the device
Cancel Click Cancel to restore default value.
Item Description
HTTP Admin Mode Enables or disables the HTTP administrative mode. When enabled,
the device can be accessed through a web browser using the HTTP
protocol.
Java Mode Enables or disables the Java mode. When enabled, the Java port
(port 4242) is open. Port 4242 is used by certain applications within
the system. This field applies to both HTTP and HTTPs connections.
HTTP Port The TCP port number on which the HTTP server listens for requests.
Existing HTTP login sessions are closed whenever this value is
changed. All new HTTP sessions must use the new port number.
NOTE: Before changing this value, check your system (e.g.
using netstat) to make sure the desired port number is not cur-
rently being used by any other service.