Advantech EKI-9228G-8CMI, User Manual

Page: 65 / 324

47 EKI-9228G Series User Manual
Subject
Use the Email Alert Subject Configuration page to configure the subject line of the
Email alert messages sent from the switch.
To access this page, click System > Advanced Configuration > Email Alerts >
Subject.
Figure 4.31 System > Advanced Configuration > Email Alerts > Subject
The following table describes the items in the previous figure.
Address
Use the Email Alert To Address Configuration page to configure the Email addresses
to which alert messages sent.
To access this page, click System > Advanced Configuration > Email Alerts >
Address.
Figure 4.32 System > Advanced Configuration > Email Alerts > Address
The following table describes the items in the previous figure.
Number of Emails
Failed The number of email alerts that failed to be sent since the counters
were cleared or system was reset.
Time Since Last
Email Sent The amount of time in days, hours, minutes, and seconds that has
passed since the last email alert was successfully sent.
Refresh Click Refresh to update the screen.
Clear Counters Click Clear Counters to reset all counters to zero.
Item Description
Message Type Select the message type with the subject to edit.
Email Subject Specify the text to be displayed in the subject of the email alert mes-
sage for the selected message type.
Submit Click Submit to save the values and update the screen.
Refresh Click Refresh to update the screen.
Delete Click Delete to delete the selected message type.
Cancel Click Cancel to restore default value.
Item Description
Message Type Specifies whether to send urgent, non urgent, or both types of email
alert message to the associated address.
To Address The valid email address of an email alert recipient.
Refresh Click Refresh to update the screen.
Add Click Add to add a new email alert to address.
Remove Click Remove to remove the selected entries.
Item Description