Advantech EKI-9228G-8CMI, User Manual

Page: 137 / 324

119 EKI-9228G Series User Manual
4.3.10.5 Transceiver Brief
Use the Port Transceiver Brief page to display Digital Diagnostics Monitoring Inter-
face information about plug-in transceiver.
To access this page, click System > Port > Transceiver Brief.
Figure 4.122 System > Port > Transceiver Brief
The following table describes the items in the previous figure.
Direction The direction of traffic on the source port (or source ports) or VLAN
that is sent to the specified destination. A source VLAN mirrors all
received and transmitted packets to the destination. Possible values
for source ports are:

Tx and Rx: Both ingress and egress traffic.

Rx: Ingress traffic only.

Tx: Egress traffic only.
Refresh Click Refresh to update the screen.
Configure Session Click Configure Session to configure the administrative mode for a
port mirroring session or to select an ACL for flow-based mirroring.
Configure Source Click Configure Source to configure one or more source ports or a
VLAN for the mirroring session and to determine which traffic is mir-
rored (Tx, Rx, or both).
Remove Source Click Remove Source to remove the selected source ports.
Item Description
Item Description
Interface Identifies the port.
Temperature The internal temperature of the transceiver measured value.
Voltage The supply voltage of the transceiver measured value.
Bias Current The bias current of the transceiver measured value.
Tx Power The transmission power of the transceiver measured value.
Rx Power The received power of the transceiver measured value.
High Alarm Thresh-
old The high alarm threshold will be displayed by red color.
High Warning
Threshold The high warning threshold will be displayed by orange color.
Low Warning Thresh-
old The low warning threshold will be displayed by green color.
Low Alarm Threshold The low alarm threshold will be displayed by blue color.