Advantech EKI-9228G-8CMI, User Manual

Page: 265 / 324

247 EKI-9228G Series User Manual
To access this page, click Routing > IP > Interface Summary.
Figure 4.276 Routing > IP > Interface Summary
The following table describes the items in the previous figure.
4.5.2.3 Interface Configuration
Use the Routing IP Interface Configuration page to configure the IP routing settings
for each non-loopback interface.
Item Description
Interface The interface associated with the rest of the data in the row. When
viewing details about the routing settings for an interface, this field
identifies the interface being viewed.
Status Indicates whether the interface is capable of routing IP packets (Up) or
cannot route packets (Down). For the status to be Up, the routing
mode and administrative mode for the interface must be enabled.
Additionally, the interface must have an IP address and be physically
up (active link).
IP Address The IP address of the interface.
Subnet Mask The IP subnet mask for the interface (also known as the network mask
or netmask). It defines the portion of the interface's IP address that is
used to identify the attached network.
Admin Mode The administrative mode of the interface, which is either Enabled or
Disabled.
State The state of the interface, which is either Active or Inactive. An inter-
face is considered active if the link is up, and the interface is in a for-
warding state.
MAC Address The burned-in physical address of the interface. The format is six two-
digit hexadecimal numbers separated by colons, for example
00:06:29:32:81:40.
IP MTU The largest IP packet size the interface can transmit, in bytes. The IP
Maximum Transmission Unit (MTU) is the maximum frame size minus
the length of the Layer 2 header.
Refresh Click Refresh to update the screen.
Edit Click Edit to edit the selected entries.
Details Click Details to open a window and display additional information.