Advantech EKI-9228G-8CMI, User Manual

Page: 258 / 324

EKI-9228G Series User Manual 240
4.4.25 X-Ring Pro
4.4.25.1 Configuration
Use the X-Ring Pro Configuration page to view and configure the X-Ring settings.
To access this page, click Switching > X-Ring Pro > Configuration.
Figure 4.268 Switching > X-Ring Pro > Configuration
The following table describes the items in the previous figure.
To add a new X-Ring:
Click Switching > X-Ring Pro > Configuration > Add.
Figure 4.269 Switching > X-Ring Pro > Configuration > Add
Item Description
Ring ID Specifies a number ranging from 1 to 99 to identify a given X-Ring Pro
group.
Ring Mode Specifies the mode of the X-Ring Pro group. The value is either “Ring”
or “Coupling”. The default value is “Ring”.

The X-Ring Pro group denoted as mode “Ring” means it is a
switch connected to the other switches to form a ring topology.

The X-Ring Pro group denoted as “Coupling” means it is a switch
that is used to inter-connect two X-Ring Pro networks.
Interface 1 Specifies the first member interface for the X-Ring Pro group. The
value is either physical port or LAG (Link-Aggregation-Group) port.
Interface 2 Specifies the secondary member interface for the X-Ring Pro group.

For the X-Ring Pro group denoted as “Ring”, the value is either
physical port or LAG (Link-Aggregation-Group) port.

For the X-Ring Pro group denoted as “Coupling”, the value is
physical port or LAG (Link-Aggregation-Group) port or “None”.
The value “None” implies the X-Ring Pro group is created not for
coupling dual-homing application
Master Ring Specifies the X-Ring Pro network that is coupling connected by the X-
Ring Pro group denoted as “Coupling”. This field is required for the X-
Ring coupling application only.
Refresh Click Refresh to update the screen.
Add Click Add to add a new X-Ring.
Remove Click Remove to remove the selected entries.