Advantech EKI-9228G-8CMI, User Manual

Page: 130 / 324

EKI-9228G Series User Manual 112
The following table describes the items in the previous figure.
4.3.9.2 Enable Password
Use the Enable Password Configuration page to configure the enable password.
To access this page, click System > Passwords > Enable Password.
Figure 4.114 System > Passwords > Enable Password
The following table describes the items in the previous figure.
4.3.9.3 Password Rules
Use the Password Rules page to configure settings that apply to all user passwords.
Item Description
Line Mode Any or all of the following passwords may be changed on this page by
checking the box that precedes it:

Console

Telnet

SSH
Password Enter the new password for the corresponding Line Mode in this field.
Be sure the password conforms to the allowed number of characters.
The password characters are not displayed on the page, but are dis-
guised in a browser-specific manner.
Confirm Password Re-enter the new password for the corresponding Line Mode in this
field. This must be the same value entered in the Password field. Be
sure the password conforms to the allowed number of characters. The
password characters are not displayed on the page, but are disguised
in a browser-specific manner.
Submit Click Submit to save the values and update the screen.
Refresh Click Refresh to update the screen.
Cancel Click Cancel to restore default value.
Item Description
Enable Password Specify the password all users must enter after executing the enable
command at the CLI prompt.
Confirm Enable
Password Type the password again to confirm that you have entered it correctly.
Submit Click Submit to save the values and update the screen.
Refresh Click Refresh to update the screen.
Cancel Click Cancel to restore default value.