Advantech ASR-5300I Series, User Manual

Page: 31 / 122

21 ASR-5300I Series Hardware User Manual
Chapter 2
H
ardware
Installation
Adjust the drive location until the mounting holes of the drive tray are aligned with
those on the hard drive. Secure the drive using four of the supplied flathead screws.
2.5.4 Installing the Hard Drive Tray into the Enclosure
Once the hard drives have been installed in the drive trays, install the drive trays into
the system.
With the hard drive tray bezel opened, align and insert the tray into the enclosure.
Once fully inserted, close the tray and use a small-size flat blade screwdriver to turn
the bezel lock from unlock to the lock position.
2.5-inch SAA hard drive
2.5-inch SATA hard drive
Warning! Each drive bay must be populated with a tray even if it does not contain
a hard drive. Empty bays disrupt the ventilation, which will cause the
system to overheat.