![background image](http://html1.mh-extra.com/html/advantech/asr-5300i-series/asr-5300i-series_user-manual_2858386114.webp)
ASR-5300I Series Hardware User Manual
104
C.1
Slide Rail Kit
The table is categorized into model numbers in alphabetical/numeric order to ensure
users can rapidly locate the slide rail kit corresponding to their specific enclosure.
C.1.1
Slide Rail Kits
If you are unable to locate clear instructions regarding installing your enclosure,
please contact Technical Support!
C.1.2
Enclosure Installation Prerequisites
To ensure proper installation and functionality of the RAID system, please observe
the following warnings:
Check that all components have been received using the provided “Unpacking
List”. Contact your vendor immediately if any component is missing.
Install the enclosure as retrieved from the packaging; install hard drives and
optional modules (FBM/supercapacitor battery) after the enclosure is mounted.
Wear an anti-static wristband throughout the entire installation procedure.
Plug the system into two different power sources (e.g., into a power outlet and a
UPS).
Ensure the rack that the enclosure will be mounted onto has proper grounding
and over-current protection.
Do not obstruct the ventilation openings. Reserve 20 cm of free space at the
front and back of the enclosure for air circulation. Maintain an ambient tempera-
ture of below 35
ºC
.
C.1.3
Unpacking the System
Use the “Unpacking List” to check that all components have been received. The basic
contents include 1 x GUI CD pack, 1 x Quick Installation Guide, and 1 x RAID Enclo-
sure Installation Guide. For details regarding the contents of each slide rail kit, please
refer to specific kit installation details in this manual.
C.1.4
Component Installation Procedure
Please install components in the following order:
1.
Rackmount rails onto the enclosure/rack/cabinet
2.
Enclosure onto the slide rail and into the cabinet
3.
Hard drives into drive trays and then into the enclosure
4.
Drive trays (with or without hard drives) into the enclosure
5.
If a supercapacitor battery/FBM were purchased as an optional component, the
controller must be removed from the enclosure before installation.
C.1.5
Tools Required
For all slide rail installation procedures, the following tools will be required:
One medium-size Phillips screwdriver
One small-size Phillips screwdriver
One medium-size flat-blade screwdriver
Note!
For more detailed instructions regarding Steps 3 to 5, please refer to
earlier sections of this hardware manual.
Summary of Contents for ASR-5300I Series
