Advantech ASR-5300I Series, User Manual

Page: 108 / 122

ASR-5300I Series Hardware User Manual 98
A.3 Fault Tolerance for RAID Models
A.4 Power Supply
2U/3U Systems
*The PSU specifications described above are general measurements and may not
represent all models. For details, please refer to specific model specifications.
Drive S.M.A.R.T Support
Yes, with user-configurable detect-only, clone and
replace, and perpetual clone functions.
CBM (Cache Backup Module)
Yes (R models only, optional accessory for single
controller models)
ISEMS (IStorage Simple
Enclosure Management Service)
via I2C interface
Yes
Automatic Drive Failure Detection Yes
Automatic Rebuild on Spare Drives Yes
Regenerate Logical Drive Parity Yes
Bad Block Reassignment Yes
Manual and Automatic Rebuild upon
Failed Drive Replacement
Yes
Manual Clone of
Suspected Failed Drive
Yes
Concurrent Rebuild on Multiple
Drives in a RAID (0 + 1) Logical Drive
Yes
Salvage the Second Temporary
Failed Drive in a RAID 1, 3, 5 or 6
Logical Drive
Yes
Salvage the First Temporary Failed
Drive in a RAID 0 Logical Drive
Yes
Input Voltage
Dual-controller model:
100VAC @ 10A
240VAC @ 5A with PFC (auto-switching)
Single-controller model:
100VAC @ 10A
240VAC @ 5A with PFC (auto-switching)
Frequency 50 to 60Hz
Power Rating 460W
DC Output
12.0V: 38A (Max.)
5.0 VSB: 2A (Max.)
Input Frequency 50 to 60Hz
AC Input 100VAC @ 10A or 240VAC @ 5A with PFC
Power Factor Correction Yes
Hold-Up Time
At least 12ms at 115/230VAC full load after a loss of
AC input
Over-Temperature Protection
Auto shutdown when lost cooling or exceeded ambient
temperature; over-voltage protection is also available.