Hydro Cat 5015B
Service Manual
VACUUM SYSTEM
To replace the squeegee blades . . .
1
Remove the squeegee from the machine, remove the front strap and the front blade from the squeegee.
2
Remove the wing nuts at the ends of the rear straps, release the latch at the center of the straps and
remove the wiping blade and the back-up blade.
3
Clean the squeegee thoroughly and install the new blades.
4
Put the squeegee back on the machine. The flat washers on the (4) squeegee mounting studs should be
positioned between the top of the squeegee mount and the bottom of the tee nuts.
________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
SQUEEGEE BLADE REPLACEMENT (continued...)
Rear Strap
Back-up Blade
Wiping Blade
Squeegee Weldment
Front Blade
Front
Strap
Front
FIGURE 6
48
