Hybrid Standalone DVR User Guide
Figure 3-22
•
Mode:
There are two modes: Timing (Schedule) and activation. If you set timing mode, you
need to set the snapshot frequency. If you set activation snapshot, you need to go to the
Detect interface (
Main Menu > Setting > Detect
) to set snapshot activation operation.
•
Image Size:
Set the snapshot picture size.
•
Image Quality:
Set the snapshot quality. The value ranges from 1 to 6.
•
Snapshot Frequency:
Set the timing (schedule) snapshot interval. The value ranges from 1-7
picture(s) per second.
Copy.
After you complete the setup, you can click
Copy
button to copy the current setup to other
channel(s). A dialog opens as shown in Figure 3-23. Check the number to select specific channel(s)
or else check the
All
box. The current channel number is grayed out. Click the
OK
button in Figure
3-21 and Figure 3-20 respectively to complete the setup.
Figure 3-23
Note:
Once you check the
All
box, you set same encode setup for all channels. The Audio/Video
enable box, Overlay button and Copy button disappear.
DVR1604HF-U-E Hybrid DVR User Guide
58