ADT DVR1604HF-U-E, User Manual, Page: 152 / 255

Hybrid Standalone DVR User Guide 4 Web Service
Section 4
Instant Record button.
When you click this button, it becomes yellow and the system begins
manual record mode. Click it again to restore the system to the previous record mode.
Section 5
Video Display Parameters.
From the left to the right, you see 7 buttons that control screen display
parameters, as described below.
1
— Video quality
2
— Video fluency
3
— Full screen mode
4
— 1-window screen mode
Click drop-down to select which channel is displayed: 1, 2, 3, 4, 5, 6, 7 or 8.
5
— 4-window screen mode
Click drop-down to select which channels are displayed: 1-4 or 5-8.
6
— 6-window screen mode
Click drop-down to select which channels are displayed: 1-6 or 3-8
7
— 8-window screen mode: 1-8
Section 6
Function Buttons.
On the top right corner are located six function buttons, which provide instant
access to the following features: digital zoom, local record, snapshot picture and close video.
Section 7
Pan/Tilt/Zoom (PTZ) operation panel.
Refer to Pan/Tilt/Zoom (PTZ) Panel on page 153.
Section 8
Image.
Refer to Image Setup on page 156 for information.
Relay-out. Refer to Relay Output on page 156 for information.
4.3.3 Real-time Monitor
On the left side of the window, left click the channel name you want to view and the corresponding
video appears in the current window.
On the top left corner, you can view the device IP, the channel number and the network monitor bit
rate.
CH
Bit rate IP
1 2 3 4 5
6
7
DVR1604HF-U-E Hybrid DVR User Guide 152