2.
Use the drop-down list to select the desired option.
Figure 2-5
3.
Enter the username and password to complete the operation.
4.
Click
OK
.
To log out using the Power button:
1.
Press the
Power
button
on the front panel for at least 3 seconds. This method requires that
you enter the username and password to complete the operation.
2.
Press the
Power
button on the remote control for at least 3 seconds. This method requires that
you enter the username and password to complete the operation.
3.
Toggle the
Power
button on the rear panel to turn off the DVR. This method does not require that
you enter the username and password to complete the operation.
2.4
Preview (Live Viewing)
After you log in, the system is in live viewing mode. You see the system date, time and channel name.
You can change the system date and time in the General Settings Menu (
Main Menu > Setting >
General
). To modify the channel name, go to the Display settings (
Main Menu > Setting > Display
).
Note:
You can return to live viewing from any other mode by right-clicking the mouse or by
pressing the Esc key on the front panel or on the remote control.
Right –click the mouse and use the context menu to select the configuration you want to display.
View 1 for single channel or View X for multi-channel display. While in multi-channel mode, double
click on a channel to view it in single channel mode.
Note:
To return to the previous menu, right-click the mouse or press the
Esc
key on the front
panel or on the remote control.
The following icons appear on the monitor screen.
TIP:
During multiple-channel mode, you can change position of cameras on the screen. For example,
left-click on the camera on channel 1, drag it to the channel 8 position and release the mouse
button. Channel 1 and Channel 8 switch positions.
1
Recording mode
3
Video loss
2
Motion detection
4
Camera lock
DVR1604HF-U-E Hybrid DVR User Guide
23