Hybrid Standalone DVR User Guide
2. Function Introduction
The quick DDNS client has the same function as other DDNS client end. It initiates the bonding of the
domain name and the IP address. Right now, current DDNS server is for our own devices only. You
must refresh the bonding relationship of the domain and the IP regularly. There is no user name,
password or the ID registration on the server. At the same time, each device has a default domain
name (Generated by MAC address) for your option. You can also use customized valid domain name
(has not registered).
3. Operation
Before you use Quick DDNS, you must enable this service and set proper server address, port value
and domain name.
•
Server address: www.quickddns.com
•
Port number: 80
•
Domain name: There are two modes: Default domain name and customized domain name.
Except default domain name registration, you can also use customized domain name (You can input
your self-defined domain name.) After successful registration, you can use domain name to login
installed of the device IP.
User Name.
This item is optional. You can input your commonly used email address.
IMPORTANT:
•
Do not register frequently. The interval between two registrations must be more than 60
seconds.
•
The system may take back the domain name that is idle for one year. You can get a
notification email before the cancel operation if your email address setup is OK.
4.6.2.7
IP Filter
After you enabled trusted sites function, only the IP listed below can access current DVR. If you
enable blocked sites function, the following listed IP addresses cannot access current DVR.
DVR1604HF-U-E Hybrid DVR User Guide
174