Acura 2016 RDX Online Reference Owner'S Manual Download Page 85

Page: 85 / 445

Indicators

Multi-Information Display Warning and Information Messages

strum

nt Pa

nel

*1:On the left: Models without full color display

On the right: Models with full color display

Message

Condition

Explanation

●

Appears if there is a problem with the starting
system.

●

As a temporary measure, press and hold the

ENGINE START/STOP

button for 15

seconds while depressing the brake pedal
and manually start the engine.
Have the vehicle checked by a dealer.

—

●

Appears after you unlock and open the
driver’s door.

Starting the Engine

P. 268

●

Appears three seconds after the

TO START

ENGINE

To Start Engine

message appears.

Starting the Engine

P. 268

●

Appears when the steering wheel is locked.

●

Move the steering wheel left and right after
pressing the

ENGINE START/STOP

button.

U.S.

Canada

Summary of Contents for 2016 RDX






























































































































































































































































































































































































































































Search results

Summary of Contents for 2016 RDX

Reviews:

Related manuals for 2016 RDX

Brands by name

Popular brands

Acura 2016 RDX, Online Reference Owner'S Manual

Search results

Summary of Contents for 2016 RDX

Reviews:

Related manuals for 2016 RDX

Brands by name

Popular brands