Acura 2016 RDX Online Reference Owner'S Manual Download Page 282

Page: 282 / 445

281

When Driving

Cruise Control

Driving

Increase or decrease the vehicle speed using the

RES/ACCEL

DECEL/SET

buttons

on the steering wheel.

•

Each time you press the button, the vehicle speed is increased or decreased by
about 1 mph (1.6 km/h).

•

If you keep the button pressed, the vehicle speed increases or decreases until you
release it. This speed is then set.

To cancel cruise control, do any of the
following:

•

Press the

CANCEL

button.

•

Press the

CRUISE

button.

•

Depress the brake pedal.

The

CRUISE CONTROL

indicator goes off.

■

To Adjust the Vehicle Speed

■

To Cancel

To decrease speed

To increase speed

To Cancel

Resuming the prior set speed:
After cruise control has been canceled, you can still
resume the prior set speed by pressing the

RES/

ACCEL

button while driving at a speed of at least 25

mph (40 km/h) or more.

You cannot set or resume in the following situations:

•

When vehicle speed is less than 25 mph (40 km/h)

•

When the

CRUISE

button is turned off

At vehicle speeds of 22 mph (35 km/h) or less, cruise
control is canceled automatically.

CRUISE

Button

CANCEL

Button

Summary of Contents for 2016 RDX






























































































































































































































































































































































































































































Search results

Summary of Contents for 2016 RDX

Reviews:

Related manuals for 2016 RDX

Brands by name

Popular brands

Acura 2016 RDX, Online Reference Owner'S Manual

Search results

Summary of Contents for 2016 RDX

Reviews:

Related manuals for 2016 RDX

Brands by name

Popular brands